With the purchase of a controller, a controller test board is provided to check for any malfunctions. 


For detailed information, please refer to the attached Controller Test Board User Manual.



If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 




The controller test board will be provided from the new controller package starting in April 2024.

Please inquire if you need a controller test board.


Link to how to use the controller test board


If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 


Currently, there is no controller available for high-speed measurement, but custom development is possible.

In a previous case, we tested ball drops with high-speed measurement at 600Hz.

Please refer to the YouTube video below.




For custom development and product inquiries, please contact us through the information provided below.



If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 

The SFCXXXXCX products can be cut for use based on the lower left section as shown in the image.


For more details, please refer to the demo videos on cutting sensors. 


Latest Cutting Sensor Demo Video 



Cutting Sensor Demo Video





We can customize the product to your desired shape for an additional fee. 

Please contact our sales team for assistance.

Sales@kitronyx.com 





If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 

The recommended operating temperature for the sensor is room temperature (23±5°C). 

Using the sensor above this temperature range may result in decreased measurement accuracy and potential damage to the sensor.


The pressure range varies by product, so please refer to the detailed product pages for specific information.

If you need to use pressure outside the specified range, we can adjust the product through customization.

Please contact our sales team for assistance.


Sales team contact information

E-mail : Sales@kitronyx.com 






If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request

For size information of standard sensors, please refer to the table below.




Custom manufacturing in required sizes is also possible. 

If you need custom production, please contact our sales team (Sales@kitronyx.com)




If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 


If pressed with a soft object like a hand at a pressure of 1 kgf/cm², the sensor's lifespan is over 50,000 times.

When pressed with a metal object at a pressure of 10 kgf/cm², the approximate lifespan of the sensor is between 500 to 1,000 times.

* The number of uses may vary depending on the usage environment (pressure conditions, shape, etc.)


The main reason for sensor damage is not exceeding the number of uses, 

but rather carelessness such as external damage due to improper usage methods and storage management.






If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 

Our product does not support waterproof functionality, 

so we recommend using it in a dry condition.





If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 

Our sensors are of the film type and can be bent for use.

However, noise may occur depending on the degree of curvature, so testing is required to confirm applicability.

Please check the related video at the link below.







If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 


This phenomenon is due to the viscoelastic properties of the material composing the sensor, 

causing the output value to change over time under the same pressure.


Because of this characteristic, we recommend performing measurements within a short period (up to 5 minutes) for more precise results.

For more detailed information, please refer to the following content.


<Example of Output Change When Drift Occurs>



If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request