The Baikal II controller can read a maximum of 48*48 sensor channels (a total of 2304 channels). 

Therefore, the maximum number of sensors that can be connected depends on the number of channels per sensor.

Example:

SFC4300CX (48*48 Ch = 2304 channels) -------------- Maximum 1 unit

Custom Sensor (48*12 Ch = 576 channels) 576 * 4 = 2304 channels ----- Maximum 4 units

* For simultaneous connection of custom sensors, a separate interface board development is required.

* Please note that the number of sensors may vary depending on the design of the custom sensor. 

Contact our sales team for further information.

If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 

The power consumption for each controller is as follows:

For more detailed information, please refer to the specific  product pages.

※ Depending on your PC environment, if you are using more than three controllers, 

it is recommended to use a USB hub that provides separate power.

If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 

The dimensions for each controller are as follows:

For more detailed information, please refer to the specific product pages.

If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact 

For technical support inquiries: https://www.kitronyx.com/support_request 

The Tinn / Baikal II wired products communicate with a PC via USB.

The Baikal II Wifi product is a dual-mode product that communicates with a PC via both USB and Wifi (2.4GHz, 802.11 g/n).

For other communication environments (such as RS232), custom development is required. 

Please contact our sales team for further information.

Sales@kitronyx.com 

If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 

The measurement speed of the Baikal II depends on the communication environment:
32Hz in a wired environment and 21Hz in a wireless environment.

For faster measurement speeds, custom development is required. 

We have developed solutions up to 600Hz. 

Please refer to the demo video linked below.

If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 

The controller itself does not support data storage or output functions. 

If you use external programs and separate data processing devices (PLC, DAQ, etc.), 

you cannot directly connect and communicate with the controller. 

However, you can receive data through the PC software connected to the controller.

If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 

With the purchase of a controller, a controller test board is provided to check for any malfunctions. 

For detailed information, please refer to the attached Controller Test Board User Manual.

If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 

The controller test board will be provided from the new controller package starting in April 2024.

Please inquire if you need a controller test board.

Link to how to use the controller test board

If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request 

Currently, there is no controller available for high-speed measurement, but custom development is possible.

In a previous case, we tested ball drops with high-speed measurement at 600Hz.

Please refer to the YouTube video below.

For custom development and product inquiries, please contact us through the information provided below.

If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.

For product inquiries: https://www.kitronyx.com/contact

For technical support inquiries: https://www.kitronyx.com/support_request