Snowboard 2 supports FSR matrix sensor as well as popular single point FSR sensors.
This post describes how to measure data from single zone FSR sensors with Snowboard 2.
Snowboard 2 can gather data from 10 single point FSR sensors simultaneously.
Connect your sensors to Snowboard 2 as shown in the photo above.
Then you need to download and unzip FSR Monitor app in download page.
If you are not familiar with Snowboard 2, consult this document first.
Double click 'fsrmonitor.exe'.
FSR Monitor will be shown as below. Click 'CHOOSE PORT' and select a port that your Snowboard 2 is attached.
Click 'START' and gently press sensors. You will see bar graphs changing.
Let's start logging to use FSR data later. Click 'START LOGGING' and click the same button just seconds after.
In data folder you can find CSV file. Open it with Excel or other application that supports CSV formatted file.
In CSV, measurement data is well stored and you can use this information for your future use.