Quick Start Guide for First-Time Users of the MonoCell
MonoCell
MonoCell Components
Tinn includes a hardware adjustment from H/W 1.04r to ensure stable compatibility with single-cell sensors (KN10, KN10-HT150).Earlier versions (1.02r and prior) are not compatible—please check your controller’s H/W version before use. If you are using an older unit, you will need to purchase a unit with H/W 1.04r or later to use single-cell sensors.
How to Install and Use MonoLAB Software
MonoLAB is the software provided by MonoCell.
Follow the steps below to install and use it with ease.
2. Run the Installation File
Follow the installation guide to complete the installation.
※ During the installation, FTDI drivers and .NET Framework will be installed. Both must be installed.
In most cases, .NET Framework is already installed, so you may receive a message indicating it is already installed.
3. Connect the Tinn Controller and Launch MonoLAB
Connect the Tinn controller to your PC using a USB cable.
When you launch MonoLAB, the software will automatically detect the connected device port.
※ If multiple devices are connected, the software may not connect to the intended device.
4. Create a Project File
Click the "Create New Project" button and enter a name for your project.
Then click the "Save" button to create the project.
※ Project files are saved in the .mlp format.
5. Connect the Sensors
Check the controller's connection ports and determine where to connect each sensor.
– You can connect up to 10 sensors in total.
6. Exit 'Edit Mode'
Once the main screen of the program appears, switch Edit Mode under the Setup menu to "Off".
When Edit Mode is turned "On", you can configure sensor connections, names, and layout.
However, real-time analysis is not available in this mode.
For more details about sensor setup mode, please refer to the MonoCell User Manual.
7. Start Real-Time Analysis
After connecting the sensors to the controller, check the central monitoring screen to ensure sensor output is being received.
By default, sensors 1 through 10 are placed in the first row of a 10×10 matrix layout.
This completes the installation and basic setup of MonoCell.
For more information, please refer to our Manual, FAQ, and Portfolio sections on the website,
or visit our YouTube channel.
If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.
For product inquiries: https://www.kitronyx.com/contact
For technical support inquiries: https://www.kitronyx.com/support_request
We recommend storing the product in a dry place at room temperature (23℃±5℃)
For sensor, please store them flat to avoid folding.
Do not place any items on top of the sensors.
If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.
For product inquiries: https://www.kitronyx.com/contact
For technical support inquiries: https://www.kitronyx.com/support_request
Sensor
The sensors are consumables and do not come with a separate warranty period.
We provide an inspection report for quality assurance when delivering the sensors.
In the case of initial defects, we offer product replacements.
Controller
1. The warranty period for the product is one year from the date of purchase.
2. After the warranty period ends, A/S (after-sales service) will be provided for a fee.
3. A/S cannot be provided within the warranty period in the following cases:
a. If the user has arbitrarily repaired, disassembled, or modified the product.
b. If the label on the bottom of the main body is missing or shows signs of tampering.
c. If the product is damaged due to user negligence or incorrect use, or if the issue is not due to product defects.
d. If the product is severely damaged and deemed unrepairable.
If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.
For product inquiries: https://www.kitronyx.com/contact
For technical support inquiries: https://www.kitronyx.com/support_request
1. For Windows 10: Press the Windows key + R key together.
The Run dialog box will appear.
Type dxdiag and press OK.
2. You can check the CPU and memory, and by moving to Display (or Display 1 & Display2), you can check the graphics card in use.
If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.
For product inquiries: https://www.kitronyx.com/contact
For technical support inquiries: https://www.kitronyx.com/support_request
If you would like to purchase a product not available on the website or the full version of ForceLAB2,
please contact us through the following methods:
1. Website: https://www.kitronyx.com/contact
2. Email: sales@kitronyx.com
If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.
For product inquiries: https://www.kitronyx.com/contact
For technical support inquiries: https://www.kitronyx.com/support_request
We recommend storing the product in a dry place at room temperature (23℃±5℃ ).
For sensors, please store them flat to avoid folding. Do not place any items on top of the sensors.
If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.
For product inquiries: https://www.kitronyx.com/contact
For technical support inquiries: https://www.kitronyx.com/support_request
You can re-register with the same email after deleting your account.
However, any coupons or points you had before deleting your account will not be restored, and any coupons you used or downloaded will no longer be valid.
If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.
For product inquiries: https://www.kitronyx.com/contact
For technical support inquiries: https://www.kitronyx.com/support_request
All personal information entered during account registration will be deleted.
If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.
For product inquiries: https://www.kitronyx.com/contact
For technical support inquiries: https://www.kitronyx.com/support_request
Here is how to delete your account:
1. Please log in.
2. Click the "My" button in the top right corner.
3. Click on "Delete Account."
If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.
For product inquiries: https://www.kitronyx.com/contact
For technical support inquiries: https://www.kitronyx.com/support_request
If you do not remember your password, you can find them through the Password Finder on the login page.
※ Your ID is the email you used when signing up.
Follow the steps below to change your password:
1. Click the login button on the website.
2. Click the "Forgot password?" tab.
3. Enter your Email and click "Find password"
4. Click "Reset Password" and a reset email will be sent to your registered email.
5. Select "Reset using email" and click the "Continue" button to set a new password via the email you receive.
If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.
For product inquiries: https://www.kitronyx.com/contact
For technical support inquiries: https://www.kitronyx.com/support_request
You cannot change the email registered at the time of sign-up, but you can change your name, company name, and phone number.
Follow the steps below to update your member information:
1. Log in to the website.
2. Go to the My tab (https://www.kitronyx.com/shop_mypage).
3. Edit your information in 'Account Info'
4. Click the 'confirm' button after changing your member information.
If you are unable to make changes using the above method, please contact us via Contact Us, and we will manually process your request after verification.
https://www.kitronyx.com/contact
If you have any other inquiries, please leave a message through the URLs below, and we will respond promptly.
For product inquiries: https://www.kitronyx.com/contact
For technical support inquiries: https://www.kitronyx.com/support_request