Datasheet
| ms9705_datasheet_180829.pdf |
Overview
MS9705 large area FSR matrix array sensor has 2,304 force sensing nodes by using 48 columns and 48 rows and is designed for true force and multi-touch detection.
Combined with an appropriate electronics such as Snowboard + MA1004 or MC1509, this sensor can simultaneously detect force applied to each cell. It has an active area of 384X384mm and can be applied to static and dynamic force mapping (pressure distribution measurement), multi-touch, measurement, medical, automotive, etc.
Combined with an appropriate electronics such as Snowboard + MA1004 or MC1509, this sensor can simultaneously detect force applied to each cell. It has an active area of 384X384mm and can be applied to static and dynamic force mapping (pressure distribution measurement), multi-touch, measurement, medical, automotive, etc.
Foot pressure image obtained by using MC1509 and MS9705 (Full Resolution)
- With an electronics that fully supports 48 row and 48 columns, this sensor can be used to build a large, high resolution pressure mapping system.
- With an electronics that fully supports 48 row and 48 columns, this sensor can be used to build a large, high resolution pressure mapping system.
|
|
|
|
|
|
Characteristics
Size: 461(W)X479(H) (mm)
Active sensing area: 384X384 (mm)
Sensel size: 8X8 (mm)
Device thickness: 0.91 (mm)
Tail: 49mm Long
Connector: Four bottom contact 1.0mm Pitch 26 way connectors (not included)
Weight: 177g
Matrix type: Shunt
Sensing type: Piezoresistive
Data Acquisition: MC1509 Force Controller for 48x48 FSR Matrix Sensors (not included)
Pressure sensitivity range: 0.5 kgf/cm2 ~ 4 kgf/cm2
Lifecycle: 1M+ actuation
Temperature range: 0.0 ~ 80.0 C
Note: Force and pressure range as well as curves below can be changed according to the characteristics of a loading object.
Active sensing area: 384X384 (mm)
Sensel size: 8X8 (mm)
Device thickness: 0.91 (mm)
Tail: 49mm Long
Connector: Four bottom contact 1.0mm Pitch 26 way connectors (not included)
Weight: 177g
Matrix type: Shunt
Sensing type: Piezoresistive
Data Acquisition: MC1509 Force Controller for 48x48 FSR Matrix Sensors (not included)
Pressure sensitivity range: 0.5 kgf/cm2 ~ 4 kgf/cm2
- Note 1: Pressure range can be changed according to the characteristics of loading object.
- Note 2: Sensor output is saturated over force and pressure over indicated sensing range.
Lifecycle: 1M+ actuation
Temperature range: 0.0 ~ 80.0 C
Note: Force and pressure range as well as curves below can be changed according to the characteristics of a loading object.
Dimension
Pinout Diagram
NC means "Not Connected".
