MS9712 mid area FSR matrix array sensor has 2,304 force sensing nodes by using 48 columns and 48 rows and is designed for true force and multi-touch detection.
Combined with an appropriate electronics such as Snowboard + MA1004 or MC1509, this sensor can simultaneously detect force applied to each cell. It has an active area of 240X240mm and can be applied to static and dynamic force mapping (pressure distribution measurement), multi-touch, measurement, medical, automotive, etc.
Combined with an appropriate electronics such as Snowboard + MA1004 or MC1509, this sensor can simultaneously detect force applied to each cell. It has an active area of 240X240mm and can be applied to static and dynamic force mapping (pressure distribution measurement), multi-touch, measurement, medical, automotive, etc.
Related Products
Snowboard
MA1004 Snowboard Adapter for 48x48 FSR Matrix Sensors
MC1509 Force Controller for 48x48 FSR Matrix Sensors
MA1004 Snowboard Adapter for 48x48 FSR Matrix Sensors
MC1509 Force Controller for 48x48 FSR Matrix Sensors
Characteristics
Size: 317.5X317.5 (mm)
Active sensing area: 240X240 (mm)
Sensel size: 5X5 (mm)
Device thickness: 0.7 (mm)
Connector: Two bottom contact 1.0mm pitch 26 way connectors and two top contact 1.0mm pitch 26 way connectors (not included)
Matrix type: Thru
Sensing type: Piezoresistive
Force sensitivity range: 0.05 ~ 3(kg) with force spread on 1.5cm2 square area with rubber between loading object and sensor
Pressure sensitivity range: 0.02 kgf/cm2 ~ 1.56 kgf/cm2 (0.28 psi ~ 18.92 psi)
Note: Force and pressure range as well as curves below can be changed according to the characteristics of a loading object.
Active sensing area: 240X240 (mm)
Sensel size: 5X5 (mm)
Device thickness: 0.7 (mm)
Connector: Two bottom contact 1.0mm pitch 26 way connectors and two top contact 1.0mm pitch 26 way connectors (not included)
Matrix type: Thru
Sensing type: Piezoresistive
Force sensitivity range: 0.05 ~ 3(kg) with force spread on 1.5cm2 square area with rubber between loading object and sensor
Pressure sensitivity range: 0.02 kgf/cm2 ~ 1.56 kgf/cm2 (0.28 psi ~ 18.92 psi)
Note: Force and pressure range as well as curves below can be changed according to the characteristics of a loading object.
Pinout Diagram
